Water Well
Atlas Copco T2W
Atlas Copco TH60
Atlas Copco T3W
Atlas Copco T4W
|
 Atlas Copco is committed to innovation. With the new Peterbilt chassis, the TH60 has the power to move effortlessly from job to job and drill under the toughest conditions. State-of-the-art hydraulics, large volume coolers, premium quality gauges, heavy steel decking, self-adjusting breakout wrenches, hydraulic holding wrenches, proven heavy-duty derrick fabrications, and specification ratings you can trust are just a few of the many elements that make the TH60 the champion of drills that it is. Two base models are available depending on the compressor volume desired.
| |
TH60 (40k) |
TH60 (70k) |
| Pullback |
40,000 lbf
54 kN |
70,000 lbf
95 kN |
| Pulldown |
25,000 lbf
34 kN |
30,000 lbf
40.7 kN |
| Feed System |
Single Cylinder, Cable Feed
D to d ratio 1:28, 7/8 in. / 22 mm cable
Drill Feed rate: 20 ft./min. / 6.1 m/min
Fast Feed Up/Down: 150 ft./min. /
45.7 m/min |
Double Cylinders, Cable Feed
D to d ratio 1:28, 7/8 in. / 22 mm cable
Drill Feed rate: 20 ft./min. / 6.1 m/min
Fast Feed Up/Down: 150 ft./min. /
45.7 m/min |
| Derrick |
| Capacity: | 45,000 lbs / 20,412 kg |
| Length: | 35 ft. 6 in. /
10,820 mm main chords |
| Head Travel: | 27 ft. 4 in. / 8,330 mm |
| Width: | 36 in. / 914 mm |
| Depth: | 28 in. / 711 mm |
|
| Capacity: | 75,000 lbs / 34,019 kg |
| Length: | 35 ft. 6 in. /
10,820 mm main chords |
| Head Travel: | 27 ft. 4 in. / 8,330 mm |
| Width: | 36 in. / 914 mm |
| Depth: | 28 in. / 711 mm |
|
Standard
Carrier
Engine 1 -
No Air
Engine 2 -
900 CFM
Engine 3 -
1070 CFM |
Peterbilt 367, 6x4 - 20 ft 7 in / 6274 mm wheelbase -
68,000 lbs / 30,844 kg GVWR
Cummins ISX 550 hp/410kW@1800 rpm for No Air option
Cummins ISX 550 hp/410kW@1800 rpm for
900 CFM/425 LPS@350 PSI IR HR 2.5 Compressor
Cummins ISX 600 hp/447kW@1800 rpm for
1070 CFM/505 LPS@350 PSI IR HR 2.5 Compressor |
Dragworks
Single Line
Bare Drum |
| Optional: | 18,000 lbs. / 8,165 kg
165 ft./min. / 50 m/min |
| Optional: | 30,000 lbs. / 13,608 kg
150 ft./min. / 45 m/min |
|
| Standard: | 18,000 lbs. / 8,165 kg
165 ft./min. / 50 m/min |
| Optional: | 30,000 lbs. / 13,608 kg
150 ft./min. / 45 m/min | |
| Rotary Head |
| Standard: | 5,500 ft-lbs. / 7,458 Nm @ 145 RPM Single-speed rotary |
| Optional: | 5,500 ft-lbs. / 7,458 Nm @ 145 RPM Two-speed rotary head
Second speed 4,000 ft-lbs. / 5,424 Nm @ 195 RPM |
| Optional: | 6,250 ft-lbs. / 8,475 Nm @ 134 RPM Single-speed rotary |
| Optional: | 6,250 ft-lbs. / 8,475 Nm @ 134 RPM Two-speed rotary head and
Second speed 4,650 ft-lbs. / 6,310 Nm @ 180 RPM |
| Optional: | 8,000 ft-lbs. / 10,848 Nm @ 105 RPM Single-speed rotary |
| Optional: | 8,000 ft-lbs. / 10,848 Nm @ 105 RPM Two-speed rotary head and
Second speed 5,500 ft-lbs. / 7,458 Nm @ 145 RPM |
|
| Options |
Mud Pumps
Floating Spindle Sub
No Air Option
High Pressure Air Piping
Pipe Spinner |
Sand Reel
Water Injection
Single Pipe Loader
Service Hoist
Down-hole Injection Lube |
|
|
